Make The Change – VMC 7238 Predator Inline Single Lure Hook Review

I’m gonna put it out there right away to save any confusion. I really dislike treble hooks. I’m not talking some mild distrust or partial disdain, I really really dislike them. I dislike what they do to the action of a lure, I dislike what they do to the mesh of a net, I dislike what they can do to unfortunate fingers but most of all I really don’t like what they can do to fish. It baffles me that in an age of fish welfare and quarry-conscious fishing an angler can walk in to a shop and purchase a 15cm lure with three brutally barbed trebles attached to it.

I don’t care whether you’re Joe Bloggs or Mick Brown, the second you push one of those trebles home the rest of the set become a disaster waiting to happen, be it catching on snags, becoming embedded elsewhere on the fish or getting fouled in the net when your catch thrashes – the chances for things to wrong increase dramatically with trebles. Allied to this they’re magnets for weed and other debris and you’ve got a recipe for frustration.

For years I had longed for an alternative to trebles and had removed all but one set from many of my lures as a compromise, but I still wasn’t comfortable. Then out of a trade catalogue beamed the alternative I might just be waiting for….

VMC 7238 LURE HOOK

VMC 7238 Inline Barbless Lure Hooks – the answer to your prayers!

Specialist lure singles, why hadn’t I thought of that?! There sat glistening from the glossy pages of the VMC manual were the 7238 Inline Singles, barbless ones too! Filled with optimism about the discovery of a potential game-changer I got hold of as many as I could in as many sizes as possible and sat at a table tearing my fingers to shreds trying to remove the crusty old trebles (and the razor sharp new ones) from my lures. Half a pint of blood later and all of my favourite lures were rigged up and ready to go.

VMC hooks 7238 pike fishing UK lure

A handful of my favourite lures rigged up and ready to rock

 

Unfortunately when I looked again I realised that half of the hooks were rigged upside down so I had to remove them to rectify the issue. It was during this process that I learned just how sharp the 7238 really is – the points are truly venomous. With their wide vertical eye and super short shank they look a little different to any other type of hook you may have seen but that big wide eye enables the hook to move freely below your lures.

Single lure hook VMC pike

The dream hook hold – you’ll find this becomes the norm with singles

I did have a few reservations though. Will I miss any takes for not having all those hooks points? Will they throw the lure more easilly? Will the change of hooks alter the action of my lures? Well, I can deal with the first two questions right now. In the three months since I put these singles on to my hard baits I have not missed a single hit. In the same time I have not lost a single fish.  The hookup rate and hold rate is up until now perfect and I have not lost a pike, perch, or zander on the VMC 7238. I’m sure it’s down to the pressure of the hook set being applied through a single point rather than spread through three causing a far more positive hold. It still staggers me, but I’ve become accustomed to striking fish on these hooks and getting them in the net every time and I can’t help but think that the circular shape is key to the success of these hooks. Actually in terms of writing this article the net has been the biggest issue as those barbless hooks seem to fall right out of their mouths as soon as the line goes slack.

Lure fishing pike VMC 7238

It took nearly a dozen fish before I could get a hook hold photo – when the line goes slack the lure falls out almost every time!

As for the action being altered by the lighter hook I am yet to see a lure that hasn’t been made to look more enticing by the extra freedom of movement provided by the 7238 Inline. Crank baits wiggle more, vibe baits rattle more and neutral buoyancy lures like the Savage Gear Hard 4-Play seem more weightless in the water – in short it’s all good. I’ve definitely noticed that I’m gathering less weed than I had with trebles too, and I’ve even played with turning the belly hook “the wrong way round” to avoid weed and snags with no impact on that 100% hook hold rate.

The 7238 has also stayed sharp, and I mean really sharp. They’ve been been bounced along the bottom, over rocks, set in to fish and really gone through the mill but I can’t see any evidence of any wear at all.

VMC Inline Barbless Lure Hooks

The Savage Gear Hard 4-Play hovers so enticingly with the light singles below it

I’d like to point out a few issues and design flaws with single hooks on lures. But I can’t. I simply don’t understand why these hooks aren’t  the norm on all predator fishing lures in the UK and would implore anybody reading this review to get hold of some and try them out on their favourite baits. You’ll find increased hookup rates, that you hold on to more fish, have far fewer issues with hooks getting caught up and most importantly you’ll reduce both the handling time of your fish and the damage done to their mouths during the process. If you’re looking for a New Years resolution then Lure Singles like the VMC 7238 Inline Barbless might just be the one to go for.

wpid-screenshot_2015-11-11-16-23-08.png

The Andy Buckley Angling Services Home Page

 

Categories: Product Reviews, Spinning | Tags: , , , , , , , , , , , , , , | 8 Comments

Post navigation

8 thoughts on “Make The Change – VMC 7238 Predator Inline Single Lure Hook Review

  1. Dave Griffiths

    Interesting and i’m tempted to try this out. Confused though which way round the hooks should face though, as it seems you have photos of both ‘options’ above. Do you recommend the same size single hook as the original treble? I have some of the same Savage Gear lures as you, but not got a clue as to what sizes to buy.

    Liked by 1 person

    • Hi dave, thanks for taking the time to read the article!
      You’ll find as you fit them to the split rings that the hooks will sit with the bend of the hook either pointing up towards the lure or down away from it. The ‘correct’ way is to have the bend pointing away from the lure (see the photo of four lures) as this exposes the hook points. By turning them the other way though you mask the points a little and make them less prone to weed our obstructions.
      As for sizes, I have used 1/0 and size one hooks on my 13cm hard 4-Play lures.
      Hope this helps?
      Andy

      Like

  2. I too have used singles for a while, on baits for pike. The notion of singles on lures MAY have drifted through my mind but I never acted on it. I shall now.

    Liked by 1 person

  3. at last single hooks available to uk anglers been using si wash hooks for a few years on my Tigerfish lures

    Liked by 1 person

  4. fishingchallenge

    I agree

    Liked by 1 person

  5. Stuart M

    We are of the same mind my friend. I also consider barbed trebles to be overly brutal to fish and largely unnecassary. Thanks to stumbling across your article whilst on the lookout for just such a solution, I have now purchased a quantity of these hooks in various sizes and am in the process of changing out all of my lures.

    Liked by 1 person

  6. Theo

    I use these hooks for dead baiting as well on a double rig with rubber bands to keep the bait on

    Liked by 1 person

Leave a comment

Blog at WordPress.com.